Default Settings; Sensor Configuration; Image Adjust; Shutter Control - eLine ELI-SIP-B21-312R Instruction Manual

6.16 Default Settings

Click Default Settings. Click Restore then click OK to restore the camera to
factory default settings. The camera will reboot.

6.17 Sensor Configuration

The Sensor Configuration menu is used to adjust camera image settings.
To configure camera image settings using the Sensor Configuration menu:
• Log into the camera using a web browser, and from the Live Video page,
right-click on the video area and select Sensor Config.
eLine Technology
51
Web Configuration
Right-click in the video area
and select Sensor Config
Web Configuration
• Click Save to save setting changes.
• Click Reset to revert to the last saved changes.
• Click Factory Setting to revert all camera sensor settings to factory
defaults.
• Click Cancel to exit.
TIP: Hold the mouse over the tabs to see the full name of the tab.

6.17.1 Image Adjust

Adjust the Brightness, Saturation, and Contrast settings for the image.

6.17.2 Shutter Control

Adjust the camera shutter settings.
• ShutterMode: Select AutoShutter or FixedShutter.
eLineTechnology.com
52