Unlocking User Accounts; Protocol; Device Restart - eLine ELI-SIP-B21-312R Instruction Manual

To add a user account:
1. Click Add. The Add User window appears.
NOTE: If the Add User menu does not appear, disable any popup blockers.
2. Enter a User Name and Password for the account and repeat the
password under Confirm.
3. Under Group, select the desired user group for this account.
4. Check Multi Login to allow the user account to log into the IP camera
from multiple location simultaneously or un-check to limit the account to
a single location at a time.
5. Click OK to save the new user account.
To modify a user account:
1. Select the user account under User and click Modify.
2. Modify the account details as needed and click OK.
To delete a user account:
• Under User, select the user account and click Delete. Click OK to confirm.

6.13.3 Unlocking User Accounts

The admin account is the only account that can unlock user accounts that
have been locked out. User accounts are locked out if the wrong password is
entered 3 or more times.
To unlock a user account:
1. Login to the camera as admin.
eLine Technology
49
Web Configuration Web Configuration
2. Click Privilege Manager>User.
3. Under User, select the locked user account.
4. Click Unlock to unlock the account.

6.14 Protocol

Protocol contains the following sub-menus:
• Protocol
• Security (Not supported)
NOTE: Do not check User Verification in the Security sub-menu, as it may
block ONVIF software from detecting the camera.
6.14.1 Protocol
The Protocol page (Protocol>Protocol) allows you to view ONVIF protocol
settings.

6.15 Device Restart

Click Device Restart. Click Restart then click OK to restart the camera.
Select the
user
Click Unlock
eLineTechnology.com
50