Service Center; Smtp (Email Alert Setup); Privilege Manager - eLine ELI-SIP-B21-312R Instruction Manual

• Password: Enter the Password you have set on the account.
4. Click OK to save settings.

6.12 Service Center

Service Center contains the following sub-menus:
• SMTP
• Alarm Center (not supported currently)

6.12.1 SMTP (Email Alert Setup)

The SMTP sub-menu allows you to configure email alerts when motion
alarms occur. Email alerts will include a .jpg snapshot attachment.
Before setting up email alerts you must configure the following:
• Motion alarms must be enabled before the camera will send email alerts.
See "6.8.2 Motion Alarm" on page 34.
• A static IP address must be configured for the camera and DNS servers
must be entered. See "6.7.1 Local Network" on page 26.
eLine Technology
45
Web Configuration Web Configuration
To enable email alerts:
1. Click Service Center>SMTP.
2. Check Enable SMTP.
3. Configure the following:
• SMTP Server Address: Enter the address for your SMTP server.
• SMTP Server Port: Enter your server's SMTP port number.
• User Name: Enter the SMTP account user name.
• Password: Enter the SMTP account password.
• Sender E-mail Address: Enter the email address that will be used to send
email alerts.
• Recipient E-mail Address 1~5: Enter up to 5 email addresses that will
receive email alerts.
• Attachment Image Quality: Select the quality of the image attachments:
High, Mid, or Low.
• Transport Mode: Select the encryption type used by the server (SSL or
STARTTLS) or select No encrypted if your server does not use encryption.
4. Click OK to save your settings. Click Send testmail to send a test email
alert.

6.13 Privilege Manager

Privilege Manager allows you to configure user accounts and user groups.
Privilege Manager contains the following sub-menus:
• Group
• User
eLineTechnology.com
46