eLine ELI-SIP-B21-312R Instruction Manual page 12

Step 3 of 6: Locate your camera's MAC address:
1. Open a web browser and enter the camera's IP address in the address
bar in the following format:
http://
http://192.168.0.120:80
IP address
2. Under User Name and Password, enter the camera's User Name
(default: admin) and Password (default: admin) and click Login.
3. Click Device Info and write down the MAC Address.
Step 4 of 6: Register for DDNS:
Register for one of the DDNS services which are currently supported for use
with your IP camera. A DDNS account allows you to set up a web site
address that points back to your local network. The following outlines how to
set up your free DDNS account.
NOTE: Your router must support UPnP to enable DDNS.
NOTE: You may use the same DDNS account for multiple IP cameras on
the same LAN.
eLine Technology
13
Configuring Remote Connection
Colon
HTTP port number
MAC Address
Configuring Remote Connection
Step 5 of 6: Enable DDNS on the camera:
1. Ent er the camera's IP address in your web browser. Log in and then click
Network Service>DDNS.
2. Check Enable DDNS.
3. Configure the following:
• Provider: Select the ddns service you use..
• Domain Name: Enter the Domain Name you received from the
confirmation email you received after you created your DDNS account
(e.g. mycamera.dyndns.org).
• User Name: Enter the User Name.
• Password: Enter the account name Password
4. Click OK to save settings.
Step 6 of 6: Connect to the camera's DDNS address:
1. Enter the camera's DDNS address in your web browser in the following
format:
http://
http://mycamera.dyndns.org:80
DDNS address
2. Under User Name and Password, enter the camera's User Name
(default: admin) and Password (default: admin) and click Login.
Once you have logged into your system using your DDNS address, you can
connect to the IP camera from a remote location using a web browser,
NVMS.
Colon
HTTP port number
eLineTechnology.com
14