Specifications; Features; Installation - Stagg HEAD BANGER 10 SLI MHW HB10 User Manual

Specifications

Voltage: AC100V 240V, 50-60Hz
•
Power Consumption: 80W
•
Light source: 7x 10W RGBW 4 in 1 LED
•
Beam angle: 25°
•
Max output @1m: 6100 Lux
•
PAN 540°, Tilt 270° with 16bit control
•
DMX channels: 7 or 12 DMX Channels
•
Packing Dimensions: 210x210x140mm
•
Net weight: 2,75 Kg
•

Features

3PIN XLR DMX in and out
•
IEC power in and out
•
4 control modes: DMX512, automatic programs, sound control, mast/slave
•
LCD display for easy setup
•
Indoor operation temperature range: -20°C +40°C
•
Dimmer: 0-100%
•
Strobe 0-10Hz
•
Please Note: Specifications and improvements in the design of this unit and this
manual are subject to change without any prior written notice.

2. INSTALLATION

Installation requirements
• The product can be hung or placed on a solid surface
• If you install the light in a hanging position, always use a suitable mounting
position and a clamp or screw that is strong enough to hold the product
without stress. Always use a safety wire to secure the light.
• Always keep a distance of minimum 0.5m to all objects or persons
• Installation should always be done by a trained professional.
• Make sure the light always has good ventilation
• It is recommended to always use 110 Ohm DMX cable to prevent data
corruption of your DMX control signal