Advertisement
Quick Links
Advertisement
Related Manuals for Stagg SLI-MHBHH10
Summary of Contents for Stagg SLI-MHBHH10
- Page 1 User Manual HEADHUNTER10 SLI-MHB-HH10...
-
Page 2: Before Usage
Table of Contents 1.BEFORE USAGE This package contains Unpacking Introduction Specifications Features 2.INSTALLATION Power Connection DMX 512 Connection 3. OPERATION Control panel Function Menu Map Operating Instructions DMX Channels... -
Page 3: Before Use
1. BEFORE USE This package contains 1x HeadHunter 10 • 1x Power Cable • 1x User Manual • Unpacking • Thank you for purchasing this product, it has been thoroughly tested and has been shipped in perfect operating condition. •... - Page 4 Specifications • Voltage: AC100V~240V • Power Consumption: 150W • Light source: USA CREE 36×3W (R8+G10+B10+W8) • LED drive current: 750mA • Beam angle: 8° • Max output @1m: 88750 lux • IP class: IP20 • DMX channels: 9/14 DMX Channels •...
- Page 5 ...
-
Page 6: Installation
1. Connect the male 3pin DMX input of the first fixture to the female 3pin DMX output of the lighting controller using 110 Ohm DMX cable, for example a Stagg Commandor 10 (skip this step when not using a controller) 2. -
Page 7: Operation
1. OPERATION Control Panel Function Button Function MODE Exits from the current menu or function ENTER Enables the currently displayed menu or sets the currently selected value into the selected function Navigates upwards through the menu list and increases the value when in a function DOWN Navigates downwards through the menu list and reduces the value when in a function... - Page 8 Menu map...
- Page 9 Operating Instructions [DMX Address Setup] • Press MENU, then Up or DOWN until "DMX Address" is displayed, then press ENTER • Change the DMX address by pressing UP or DOWN • Press ENTER to save the DMX address [Setup Control Mode] •...
- Page 10 [Auto Mode and Sound Control setup] • Press MENU, then Up or DOWN until "Auto Sound" is displayed, then press ENTER • Press UP or DOWN to choose Auto or Sound • Press ENTER to save [Pan inverse setup] •...
- Page 11 [Dimming speed setup] • Press MENU, then Up or DOWN until "Dimmer Speed" is displayed, then press ENTER • Press UP or DOWN to choose between Fast (linear dimming curve) or Smooth (logarithmic curve that simulates a halogen lamp) •...
- Page 12 [Lamp Auto Test] • Press MENU, then Up or DOWN until "Auto Test" is displayed, then press ENTER • The light will run a test program testing all colours individually followed by all together • Press MENU to exit [Software Version] •...
- Page 13 DMX Channels 14 CH Value Function 0-255 PAN 0-630º 0-255 PAN 16 bit 0-255 Tilt 0-220º 0-255 Tilt 16 bit 0-255 Pan & Tilt Speed (fast to slow ) 0-255 Dimmer 0-100% 0-255 Red 0-100% 0-255 Green 0-100% 0-255 Blue 0-100% 0-255 White 0-100%...
- Page 14 9 CH Value Function 0-255 PAN 0-630º 0-255 Tilt 0-220º 0-255 Pan & Tilt Speed (from fast to slow ) 0-255 Dimmer 0-100% 0-255 Red 0-100% 0-255 Green 0-100% 0-255 Blue 0-100% 0-255 White 0-100% 0-19 No function 20-255 Strobe 0-20HZ...
- Page 15 ...
- Page 16 IMPORTANT SAFETY INSTRUCTIONS READ AND KEEP THESE INSTRUCTIONS. HEED ALL WARNINGS. • If, after you have followed the instructions outlined above, this device fails to function, please contact your dealer. Under no circumstances should this device be opened. Leave all servicing to qualified personnel.