Advertisement

Quick Links

USER MANUAL
Ecopar 630 31
SLI-Ecopar63031
Please read the instructions carefully before use

Advertisement

Table of Contents
loading

Summary of Contents for Stagg Ecopar 630 31

  • Page 1 USER MANUAL Ecopar 630 31 SLI-Ecopar63031 Please read the instructions carefully before use...
  • Page 2: Safety Instructions

    SAFETY INSTRUCTIONS Please read the instructions carefully as they include important information about the installation, operation and maintenance. • Please keep this user’s guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. •...
  • Page 3 • Do not operate in a dirty or dusty environment. Clean fixtures regularly. • Do not allow children unsupervised to operate the fixture. • Do not touch any wire during operation as there might be a hazard of electric shock. •...
  • Page 4: Installation

    INSTALLATION The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and able to support 10 times the unit’s weight.
  • Page 5: Setting Up The Device

    SETTING UP THE DEVICE...
  • Page 6 DMX Mode With the menu button, select the DMX mode (dxxx) and press the enter key to confirm. Then use the up and down buttons to choose the desired DMX channel (1 – 512) and press the enter key to confirm. Press the menu button to return to the main menu.
  • Page 7 Strobe Mode With the menu button, select the Strobe mode (Stxx) and press the enter key to confirm. Then use the up and down buttons to select the desired mode. -St00: Auto Master without strobe -St01 to St16: Strobe Speed from slow to fast In this mode, the fixture will play flashes at different speeds.
  • Page 8: Dmx512 Connections

    Warning To avoid signal transmission problems and interferences when using fixtures in chain, use a Stagg N-series professional 3-pin DMX terminator (resistance: 120 ohms; pin2: DMX-; pin3:DMX+). FIXTURE CLEANING An internal cleaning must be carried out periodically to optimize the light output. The...
  • Page 9 For more info and the latest product updates: staggmusic.com EMD Music S.A. Boulevard Général Wahis 16A 1030 Brussels Belgium 05/2018...

Table of Contents