Related Manuals for Stagg TAGGER 30
Summary of Contents for Stagg TAGGER 30
- Page 1 USER MANUAL TAGGER 30 SLI-MHBTAGG30 Please read the instructions carefully before use...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS Please read the instructions carefully as they include important information about the installation, operation and maintenance. • Please keep this user’s guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. •... - Page 3 • Do not operate in a dirty or dusty environment. Clean fixtures regularly. • Do not allow children unsupervised to operate the fixture. • Do not touch any wire during operation as there might be a hazard of electric shock. •...
-
Page 4: Installation
INSTALLATION The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and able to support 10 times the unit’s weight. -
Page 5: Setting Up The Device
SETTING UP THE DEVICE... - Page 6 DMX Mode With the menu button, select the DMX mode (ADDR) and press the enter key to confirm. Then use the up and down buttons to choose the desired DMX channel (1 – 512) and press the enter key to confirm. Press the menu button to return to the main menu.
- Page 7 (SL.1) and Slave 2 (SL.2). Thanks to this mode, you can connect several Tagger 30 in a daisy chain and make a nice lightshow. All the units will play in the same rhythm. To do so, put the first light in your chain in “master”...
- Page 8 Sound sensibility With the menu button, select the sound sensibility setting (SENS) and press the enter key to confirm. Then use the up and down buttons to choose the desired sensibility of the internal microphone from 000% to 100%. Blind Menu With the menu button, select the automatic mode (BLND) and press the enter key to confirm.
-
Page 9: Dmx512 Connections
Warning To avoid signal transmission problems and interferences when using fixtures in chain, use a Stagg N-series professional 3-pin DMX terminator (resistance: 120 ohms; pin2: DMX-; pin3:DMX+). FIXTURE CLEANING An internal cleaning must be carried out periodically to optimize the light output. The... - Page 10 For more info and the latest product updates: staggmusic.com EMD Music S.A. Boulevard Général Wahis 16A 1030 Brussels Belgium 05/2018...