Information About The Machine; Notes For The User; Intended Use Of The Appliance; Appliance Identification - Saeco NEXTAGE CAP010 Use And Maintenance

English
2

INFORMATION ABOUT THE MACHINE

2.1

Notes for the user

The appliance must be installed in a properly lighted,
sheltered and dry location and on a working surface able
to withstand its weight.
To guarantee the correct operation and reliability over
time, the following is recommended:
• ambient temperature: from +1°C to +25°C;
• maximum humidity: 90% (not condensed).
For special installations not covered in this publication,
please contact the dealer or the local importer. If this is
not possible, please contact the Manufacturer directly.
For all possible requirements, always refer to the Distributor or
Importer for each Country. If a specific Country has no
Importer, recourse should be made directly to the Manufacturer.
The Manufacturer's maintenance service is available to
clarify any doubts concerning the correct operation of the
appliance.
In case of damages to the power cable, it must be replaced
by the Manufacturer or by its Technical Assistance Service,
or alternatively, by a person with similar qualifications.
The AUTHORISED SERVICE CENTRE is available for any
type of explanation and information pertaining to appliance
operation and to satisfy requests for the supply of spares
or technical assistance.
The Manufacturer reserves the right to introduce further
improvements to the appliance without notice.
All rights of reproduction of this manual are reserved by
the Manufacturer.
The Maintenance Technician must carefully read and
respect the safety warnings contained in this manual so
that every intervention concerning installation, starting up,
use and maintenance will be safely carried out.
2.2

Intended use of the appliance

The machine is intended for the brewing of coffee and hot
beverages (decaffeinated coffee, cappuccino, chocolate,
etc.). The dosage of each type of brewing can be
programmed. Instant products must be consumed right
after the brewing and cannot be stored for long.
50
Any other use is to be considered improper and therefore
dangerous.
Do not place any product inside the machine which
may be dangerous as a result of unsuitable
temperatures.
Improper use of the vending machine invalidates all
warranties. The Manufacturer declines any liability for
damage to property or injury to persons.
Improper use also includes:
• any use of the vending machine other than the intended
use and/or according to procedures which are not
described in this publication;
• any intervention on the appliance contrasting with the
indications referred to in this manual;
• any alteration of components and/or safety devices
without prior consent of the Manufacturer or carried out
by personnel not authorized for such operations;
• any location of the vending machine not provided in this
manual.
2.3

Appliance identification

The appliance is identified by the model name and serial
number shown on the special plate.
ID Data plate