Connecting The Usb Port - Saeco NEXTAGE CAP010 Use And Maintenance

Insert the rear spoiler as shown in the figure.
5.6

Connecting the USB Port

The USB port can be used to connect the machine to the
AUTHORISED SERVICE CENTRES' appliances in order to
carry out checks and programming operations.
To access the USB port perform the following operations.
Each operation via USB port must be carried out with
the door closed.
Loosen the socket head screw that is placed on the back
of the control panel.
Slide the control panel upwards.
Now the control panel is not attached to the machine any
more and should be removed as shown in the figure.
Attach the pins I to the suitable guides M as shown in the figure.
I Control panel pin
M Control panel guide
English
59