Saeco NEXTAGE CAP010 Use And Maintenance page 36

English
• Remove the brew group by holding it from the special
handle.
• Wash abundantly with warm water.
Do not use detergents.
• Refit the brew group, connect the coffee pipe and close
the door.
When inserting the brew group make sure that the
rubber joint is in vertical position, with the silicone
hose going downwards.
Press "Back" to return to the previous menu.
80
To exit the maintenance menu and return to the beverage
selection screen, press the bottom left arrow and wait for
a few seconds.
10.2.7 Milk Circuit Cleaning
Switch on the machine as instructed in the "First Appliance
Start Up" section.
Press the "Customer menu" button.