Fitting The Coffee Grounds Bag; Used Capsule Collection Bag Assembly; Connection To Serial Port; Fitting The Payment Systems - Saeco Cristallo 600 EVO Use And Maintenance

6.4.2 Instruction plate
Slide the instruction plate into the slot, pressing the flap
inwards.
You need to remove the keypad panel in order to carry
out this operation.
Otherwise, please see instructions in "Product labels".
6.5 Fitting the coffee grounds
bag
Remove the clip from the grounds discharge channel.
Slip the clip into the coffee grounds bag (capacity of 50
litres).
Place the bag on the channel.
6.6 Used capsule collection bag
assembly
(For Capsule version only)
For the assembly of the used capsule discharge duct, carry
out the same operations as described in section "Coffee
ground bag assembly".
6.7

Connection to serial port

The connector on the CPU board and an interface kit can
be used to connect the vending machine to a personal
computer or to the devices supplied by the technical
service in order to perform data detection operations.
6.8

Fitting the payment systems

The vending machine is designed for the installation of
various payment systems, such as:
- parallel banknote reader 24V DC;
- parallel validator 24 V DC
- executive systems (also PRICE HOLDING);
- MDB systems;
- BDV systems;
- cancelling machine 24V DC;
- parallel validator 12V DC (*);
- cashless reader;
(*) optional kit required.
The vending machine is
not supplied
payment
must be installed by the
person in charge of its
fitting.
English
with any
system, which
33