We thank you for your purchase and • Large capacity inline paint filter welcome you to our large and growing family of Titan users. • “Floating ball” pressure bleed valve Hydraulic drive makes possible the longest stroke and slowest cycling pumps in the industry which translates into low •...
The hydraulic fluid level should read “Full” on the dipstick. Check it daily. See the hydraulic system maintenance instructions for changing or adding hydraulic fluid. Do not overfill. Use only Titan Coolflo™, part no. 430-361. The gasoline engine oil level is determined by the manufacturer.
1. Check the hydraulic fluid daily. It should read “Full” on 3. Unthread the safety tip guard and remove the spray tip. the dipstick. If it is low, add only Titan Coolflo, part # Wash the tip in solvent and use a tip probe to remove any 430-361.
IMPORTaNT: use of non-Titan manufactured service parts 8. Place spacer (17) behind the valve sleeve and spool may void warranty. This motor contains hydraulic fluid. assembly (12). Take precautions to protect the immediate area from oil 9. Insert snap ring (18) to hold spacer (17) in place.
Page 29
PaRT emergency repairs. DEScRIPTION QTY. Packing life will be extended by the use of Piston Lube, Titan part # 314-480 permanent solvent. Fill to 1/4” level in pump block (2). 314-030 Packing set, upper Do not use oil or thinners as lubricant. Use Piston Lube for upper...
Page 31
(23) into displacement rod (18). faster on one stroke or the other. The use of Titan Piston Lube, part # 314-480 is recommended as an upper packing lubricant.
Page 33
(16) leakage from the top packing, or if pump strokes become faster on one stroke or another. The use of Titan Piston Lube Part # 314-480 is recommended as an upper packing lubricant. DO NOTE: It is not necessary to overtighten foot valve and NOT SuBSTITuTE OIL, WaTER OR SOLvENT for an upper cylinder into pump block.
Page 35
Part No. 944-600 IMPORTaNT: all non-moving threads must be assembled with Loctite sealant, Titan part # 426-051. 944-620 Bleed valve assembly, 1/8” NPT 945-600 Bleed valve assembly, 1/2” NPT ITEM...
Page 36
IMPORTaNT: The valve stem stop (6) must be unthreaded from the valve stem (3) with a socket screwdriver, then the valve stem can be threaded out of the valve body. IMPORTaNT: all non-moving threads must be assembled with Loctite sealant, Titan part # 426-051. 103-807 Siphon valve assembly...
Key accessories and Service Kits These items may be purchased separately from your local Titan distributor. Part No. Description 103-818 Siphon hose assembly with CamLock assembly, 1 1/2” x 6’ 103-807 Siphon hose assembly with rock catcher 1” x 4’...
Warranty Titan Tool, Inc., (“Titan”) warrants that at the time of delivery to the original purchaser for use (“End User”), the equipment covered by this warranty is free from defects in material and workmanship. With the exception of any special, limited, or extended warranty published by Titan, Titan’s obligation under this warranty is limited to replacing or repairing without charge those parts which, to Titan’s...
Need help?
Do you have a question about the Speeflo Hydra M 2000 and is the answer not in the manual?
Questions and answers