Titan SPEEFLO Commander 741-440 Owner's Manual
  1. Manuals
  2. Brands
  3. Titan Manuals
  4. Paint Sprayer
  5. SPEEFLO Commander 741-440
  6. Owner's manual
Titan SPEEFLO Commander 741-440 Owner's Manual

Titan SPEEFLO Commander 741-440 Owner's Manual

Air powered airless sprayer
Hide thumbs
Table of Contents

Advertisement

Quick Links

SPEEFLO Commander
Air Powered Airless Sprayer
Model Numbers:
741-440
761-301
761-411
741-331
Printed in the U.S.A.
Owner's Manual
For professional use only
Do not use this equipment
before reading this manual!
NOTE: This manual contains important
warnings and instructions. Please
read and retain for reference.
© Titan Tool Inc. All Rights Reserved. Form No. 0528924B
0910
•

Advertisement

Table of Contents
loading

Related Manuals for Titan SPEEFLO Commander 741-440

Summary of Contents for Titan SPEEFLO Commander 741-440

  • Page 1 Air Powered Airless Sprayer Model Numbers: 741-440 NOTE: This manual contains important warnings and instructions. Please 761-301 read and retain for reference. 761-411 741-331 © Titan Tool Inc. All Rights Reserved. Form No. 0528924B 0910 • Printed in the U.S.A.

  • Page 2: Safety Precautions

    • Use lowest possible pressure to flush equipment. • Do not spray onto pump assembly. English © Titan Tool Inc. All rights reserved.

  • Page 3: Grounding Instructions

    • For electric units — Always unplug cord from outlet before working on equipment. • Do not use the hose as a strength member to pull or lift the equipment. • Do not lift by cart handle when loading or unloading. © Titan Tool Inc. All rights reserved.

  • Page 4: Table Of Contents

    @ 100 psi per gallon of output @ 100 psi air pressure........52 SCFM (1.47m /min) air pressure........17 SCFM (0.48m /min) Air inlet ......... 1/2” NPT (F) Air inlet ......... 1/2” NPT (F) © Titan Tool Inc. All rights reserved.

  • Page 5: Introduction

    Titan Speeflo users. longest packing life. Titan pumps are proven performers for all types of jobs. There • Wiper seal on lower packings keeps abrasive materials are models for virtually any application, including architectural, from hardening on cylinder wall.

  • Page 6: Setup

    8. Fill the Wet-Cup 1/2 full with Titan’s Lubrisolv, supplied by the factory. This extends packing life. 9. Strain all paints with Titan’s 5 gallon Nylon strainer, Part No. 160-500 or 1 gallon Nylon strainer, Part No. 160- 100 to assure trouble-free operation and freedom from frequent cleaning of inlet screen and gun strainer.

  • Page 7: Startup

    Operation at very high cycle rates (i.e. greater than 60) will require a higher AirCare™ injection rate. IMPORTaNT: use only Titan aircare™ Part No. 311-011 lubricant. use of any detergent-type lubricants will cause a serious problem with the pump and void the warranty.

  • Page 8: Operation

    Store preorifice and tips in clean place. clogged material. 4. If the gun is equipped with a Titan TAC 5™ Assembly, see Technical Data Manual 150:99 for instructions. 5. Release the gun trigger lock and spray briefly into a waste container to flush out any clogged particles.

  • Page 9: Air Motor Maintenance

    Air motors should be served with moisure free air and for this, an may contaminate the paint material and is not recommended. airline filter / moisture separator, such as Titan Part No. 141-057 is recommended. Very cold and humid air conditions combined...

  • Page 10: Troubleshooting

    Remove restrictions in system, clean tip screen if filter is used. E. Round pattern. Worn tip. Replace tip. Fluid too heavy for tip. Increase pressure. Thin material. Change nozzle tip. © Titan Tool Inc. All rights reserved.

  • Page 11: Air Motor

    F. Pump chatters on up or down stroke Solvent has caused upper packing to Back off upper packing nut 1/4 turn (if swell, or packing is too tight. applicable) and restart pump. Repeat if necessary. © Titan Tool Inc. All rights reserved.

  • Page 12: Parts Lists And Service Instructions

    Series Portable Models © Titan Tool Inc. All rights reserved.
  • Page 13 840-209 Bleed line assembly w/valve 103-800 Siphon hose assembly, 3/4” w/rock catcher 103-807 Siphon hose assembly, 1” w/rock catcher 103-812 Siphon hose assembly, 1 1/4” w/rock catcher 219-100 Mounting kit 219-200 Mounting kit © Titan Tool Inc. All rights reserved.

  • Page 14: Commander™ Series Wall Mount And Drum Mount Models

    Series Wall Mount and Drum Mount Models © Titan Tool Inc. All rights reserved.
  • Page 15 Filter assembly, outlet (6000 psi) 840-209 Bleed line assembly w/valve 103-806 Siphon hose assembly, 3/4” w/rock catcher 103-808 Siphon hose assembly, 1” w/rock catcher 103-812 Siphon hose assembly, 1 1/4” w/ rock catcher © Titan Tool Inc. All rights reserved.
  • Page 16 Ring, wear 858-660 Screw 742-947 Base, motor 858-812 Nut, stop 101-205 Lug, ground 738-218 Keeper, upper valve 858-624 Screw 740-925 Valve 862-701 738-224 O-ring 138-007 Nut, coupling 740-985 Keeper, lower valve 138-017 Nut, coupling © Titan Tool Inc. All rights reserved.

  • Page 17: Air Motors

    The 742 Series Air Motor should be served with moisture-free O-ring (30). air. A water trap, Titan Part #141-057, is recommended. For use 10. Install new O-rings (14) on valve sleeve (13). Grease under very cold and humid conditions a moisture separator and valve sleeve and install into cylinder head (5) so large an automatic oiler may be necessary to avoid icing.

  • Page 18: Fluid Pump, 140-556

    138-031 Gasket 138-032 Ball stop 138-340 Ball 140-991 Valve, foot 818-010 Elbow 142-100 assembly Set ITEM PaRT DEScRIPTION QTy. 870-401 870-004 Washer 140-016 Stanchion 441-955 Rod, connecting 866-601 Nut, jam 138-007 Nut, coupling © Titan Tool Inc. All rights reserved.
  • Page 19 140-556 Fluid Pump Service Information Service Kits IMPORTaNT: use of non-Titan manufactured service parts 140-052 Pump service kit, minor may void warranty. ITEM PaRT The 140 Series Pump should receive a routine servicing after DEScRIPTION QTy. approximately 1200 hours of use. A 140-052 Minor Pump Kit should be installed at this time.

  • Page 20: Fluid Pump, 155-559

    Stroke Length Displacement volume / Displacement volume / 40 cycles Motor Motor Pump Rod area Stroke / 80 Strokes Selection ratio LITER GaL. LITER .976 10.2 63.9 .0639 1.35 5113 5.113 742 Series 45:1 © Titan Tool Inc. All rights reserved.
  • Page 21 155-052 Packing set, leather on one stroke or another. The use of Titan Lubrisolv Part # 155-053 Packing set, leather/poly. 310-200 is recommended as an upper packing lubricant. DO...

  • Page 22: Fluid Pump, 181-556

    Displacement volume / Displacement volume / 40 cycles Motor Motor Pump Rod area Stroke / 80 Strokes Selection ratio LITER GaL. LITER 1.38 8.90 10.2 5.55 90.9 0.091 1.92 7272 7.27 742 Series 30:1 © Titan Tool Inc. All rights reserved.
  • Page 23 NOTE: It is not necessary to overtighten foot valve and on one stroke or another. The use of Titan Lubrisolv Part # cylinder into pump block. O-ring seals perform 310-200 is recommended as an upper packing lubricant.

  • Page 24: Fluid Pump, 185-551

    Displacement volume / Displacement volume / 40 cycles Motor Motor Pump Rod area Stroke / 80 Strokes Selection ratio LITER GaL. LITER 1.38 8.90 10.2 5.55 90.9 0.091 1.92 7272 7.27 742 Series 30:1 © Titan Tool Inc. All rights reserved.
  • Page 25 (16) leakage from the top packing, or if pump strokes become faster on one stroke or another. The use of Titan Lubrisolv Part # 310-200 is recommended as an upper packing lubricant. DO NOTE: It is not necessary to overtighten foot valve and NOT SUBSTITUTE oil, water or solvent for an upper packing cylinder into pump block.

  • Page 26: Fluid Pump, 245-555

    Stroke Length Displacement volume / Displacement volume / 40 cycles Motor Motor Pump Rod area Stroke / 80 Strokes Selection ratio LITER GaL. LITER 2.08 13.42 10.2 8.38 137.32 0.137 10.986 742 Series 20:1 © Titan Tool Inc. All rights reserved.
  • Page 27 NOTE: Ball cage pin (12a) to be in lower position unless leakage from the top packing, or if pump strokes become faster pump is to be used for heavy block filler or on one stroke or another. The use of Titan Lubrisolv Part # roofing materials. 310-200 is recommended as an upper packing lubricant. DO NOT SUBSTITUTE oil, water or solvent for an upper packing 10.

  • Page 28: Air Assembly

    921-712 Regulator, air, 1/2” 112-204 Nipple, 1/2” 928-917 Air block, 1/2” 210-023 Plug, pipe, 1/2” 227-027 Plug, pipe, 1/2” 858-647 Screw 141-157 Moisture separator, 1/2” 311-100 Lubricant, Air Care™ * Filled at factory © Titan Tool Inc. All rights reserved.

  • Page 29: Heavy Duty Cart

    End cap 590-350 Frame 862-410 Nut, 3/8” - 16 862-001 Washer, 3/8” 862-472 Screw, 3/8” - 16 x 2 1/4” 590-351 Bracket 590-353 Axle 670-105 Wheel, 16 inch 870-003 Washer 570-010 Cotter key © Titan Tool Inc. All rights reserved.

  • Page 30: Pump Mount Drum Cover

    860-003 Washer, flat, 5/16 860-502 Nut, Ela. Stp 5/16 - 18 738-213 Spring 862-001 Washer, flat, 3/8” 862-411 Nut, Flex Lock, 3/8 - 16 219-504 Plate, adapter * Not included in this assembly © Titan Tool Inc. All rights reserved.

  • Page 31: Pump Mounts

    Mounting kit 860-535 Screw (4) 219-504 Adapter plate (1) 860-502 Nut (4) 860-003 Washer (4) 191-444 Nipple (1) 219-200 Mounting kit 860-535 Screw (4) 219-504 Adapter plate (1) 860-502 Nut (4) 860-003 Washer (4) © Titan Tool Inc. All rights reserved.

  • Page 32: 920 Outlet Manifold Filter Assembly

    920-006 Gasket, Teflon (thick) 920-070 Gasket, Teflon (thin) 920-927 Body, filter (5000 psi) 920-931 Body, filter (6000 psi) 812-003 Nipple, hex 227-027 Plug, pipe 227-033 Plug, pipe 200-555 Adapter, swivel 200-554 Adapter, swivel © Titan Tool Inc. All rights reserved.
  • Page 33 (1) 3/8” NPT (F) with 1/4 NPSM (M) hose connection (1) 3/8” NPT (F) plug for additional gun hookup. Wetted parts Carbon steel with electroless nickel and cadmium plating, stainless steel, Teflon © Titan Tool Inc. All rights reserved.

  • Page 34: Fluid Accessories

    420-650 Hose, fluid, 3/4” 3’ 6’ 420-700 Hose, fluid, 1” 6’ 604-125 Hose assembly, 1 1/4” 103-130 Spring 103-125 Spring 103-119 Clip, hose guard 194-661 Adapter 194-771 Adapter 205-559 Elbow * Not illustrated © Titan Tool Inc. All rights reserved.
  • Page 35 ITEM PaRT DEScRIPTION QTy. 944-620 Valve, bleed 103-101 Bleed line assembly 103-117 Tube (1) 538-030 Hose assembly (1) 103-106 Bleed Line assembly ITEM PaRT DEScRIPTION QTy. 103-317 Tube 201-555 Elbow 538-031 Hose assembly © Titan Tool Inc. All rights reserved.
  • Page 36 (3) with a socket screwdriver, then the valve stem can be threaded out of the valve body. IMPORTaNT: all non-moving threads must be assembled with Loctite sealant, Titan part # 426-051. 944-050 Bleed valve Service Kit ITEM...

  • Page 37: Outlet Accessories

    1 - GuN DEScRIPTION 1/4” 1/4” aDD-ON 3/8” 3/8” aDD-ON 1/4” 3/8” 970-100 Manifold 940-553 Valve, ball 941-555 Valve, ball 814-002 Nipple, hex 814-004 Nipple, hex 227-006 Nipple, hex 808-555 Nipple, hex 227-033 Plug, pipe © Titan Tool Inc. All rights reserved.

  • Page 38: Accessories And Service Kits

    Key accessories and Service Kits These items may be purchased separately from your local Titan distributor. Part No. Description 103-800 Siphon hose assembly with rock catcher 3/4” x 3’ 103-806 Siphon hose assembly with rock catcher 3/4” x 6’...
  • Page 39 Notes: © Titan Tool Inc. All rights reserved.

  • Page 40: Warranty

    Titan Warranty for the commander™ airless Sprayers Titan Tool, Inc., (“Titan”) warrants that at the time of delivery to the original purchaser for use (“End User”), the equipment covered by this warranty is free from defects in material and workmanship. With the exception of any special, limited, or extended warranty published by Titan, Titan’s obligation under this warranty is limited to replacing or repairing without charge those parts which, to Titan’s...

This manual is also suitable for:

Speeflo commander 761-301Speeflo commander 761-411Speeflo commander 741-331Speeflo admiral 830-331Speeflo admiral 830-451Speeflo admiral 860-451 ... Show all

Table of Contents