Outlet Accessories - Titan Speeflo Hydra M 2000 Owner's Manual

hydra M™ & hydra Pro Super™ Outlet accessories
7
8
cleaning
Clean filter regularly. Dirty or clogged filters can greatly reduce
filtering ability and cause a number of system problems including
poor spray patterns, clogged spray tips, etc.
To clean the filter, shutoff system and relieve all system pressure.
See the Pressure Relief Procedure on page 9.
1. Remove filter cap (1).
2. Pull filter element with check ball (3) straight out of the
filter body (6).
3. Thoroughly clean inside filter body (6), filter element with
check ball (3) and filter cap (1) with appropriate solvent.
Use care in handling parts as dirt, debris, scratches or
nicks may prevent O-rings or gaskets from sealing.
The 920 Series Filter Elements filter from the inside out. Be
certain to clean the screen element thoroughly on the inside.
Soak in solvent to loosen hardened paint, etc. or replace.
© Titan Tool Inc. All rights reserved.
1
2
3
4
5
6
10
9
37
Outlet Manifold Filter assembly
ITEM PaRT
DEScRIPTION
NO. NO.
1 920-917 Filter cap assembly
2 920-103 Ball, S.S.
3 920-004 Screen, filter, 50 mesh
4 920-006 Gasket, PTFE (thick)
5 920-070 Gasket, PTFE (thin)
6 920-927 Body, filter (5000 psi)
7 812-003 Nipple, hex
8 227-027 Plug, pipe
9 227-033 Plug, pipe
10 703-137 Swivel fitting
Part No. 920-050 Filter Service Kit
ITEM PaRT
DEScRIPTION
NO. NO.
2 920-103 Ball
4 920-006 Gasket, PTFE
5 920-070 Gasket, PTFE
Specifications
Max. Working Pressure
Filter Area
Outlet Ports
Wetted parts
QTY
1
1
1
1
1
1
1
1
1
1
QTY.
1
1
1
5000 psi (345 bar)
18in (116 cm )
2 2
(1) 1/4" NPT (F) for
bleed valve
(1) 3/8" NPT (F) with
1/4 NPSM (M) hose
connection
(1) 3/8" NPT (F) plug for
additional gun hookup.
Carbon steel with
electroless nickel
and cadmium plating,
stainless steel, PTFE