EarthQuake XJ-300 FR User Manual page 11

Linking 2 XJ-300FRs
The XJ-300FR's ingenious design lets the user link two amplifiers together
depending on the desired channel set-up.
1) Match the bolts on the left side of one amp with the linking holes on the right
side of the other amp.
2) Once they are connected, push the right amp forward while pushing the
left amp backwards until they are locked together. They are linked correctly
when the face plates are flush.
3) Bracket the back plates of the amps together for added reinforcement.
WHEN LINKING THE AMPS, DO NOT APPLY PRESSURE
ONTO THE FRONT PLATES OR BACK PLATES. THIS
COULD DAMAGE THE TERMINALS, KNOBS, OR TOGGLE
SWITCHES. AMPS DAMAGED IN THIS WAY ARE NOT
COVERED BY THE WARRANTY.
Specifications are subject to change without notice
1
1
2
3
XJ-300FR Manual 11