EarthQuake XJ-300 FR User Manual page 16

Connecting to SWAT-2.4X Wireless Transceiver
Note: Make sure the back input toggle switch is set accordingly
when connecting to the SWAT-2.4X
The XJ-300FR is optimized for use with the SWAT-2.4X Wireless Transceiver.
After the amplifier is wired to the speakers, connect the SWAT-2.4X Receiver
to the USB inputs on the XJ-300FR using a USB cable. This will also power
the SWAT-2.4X Receiver, eliminating the use of the power supply.
Connect the SWAT-2.4X Transmitter to your
audio source, processor, or computer with a
USB cable. Now you can wirelessly transmit
audio to the XJ-300FR.
SWAT-2.4X Wireless Transmitter
NOTE:
If you choose to connect your audio source
using an RCA or mini-jack cable, be sure to
switch the toggle to "RCA" and power the
SWAT-2.4 with either the USB or the sup-
plied power supply.
16 XJ-300FR Manual
SWAT-2.4X Wireless Receiver
Earthquake Sound Corp. | www.earthquakesound.com
Music Source
with audio output