Status; Camera Status - D-Link DNR-322L User Manual

Section 3 - Configuration
This page displays the connection and recording status of your cameras.
Connection Shows the camera connection status. The user can click

Status:

Connect or Disconnect to change the connection status.
Recording Shows the recording schedule and current recording status of
Status: the cameras. Please note that if the camera is disconnected,
the recording may continue but will produce blank video.
Frame Rate: Displays the frame rate of the camera.
Bit Rate: Displays the transmission bit rate of the camera.
Note: If the Frame Rate or Bit Rate is too low, please check
the network configuration between cameras and NVR. If the
bit rate is too high, it will cause the Live Video display to slow
down or lag. If this is the case, please modify the quality or
bitrate setting in the camera web GUI accordingly.
Disk Status: Shows the hard drive space and estimated remaining
recording time status.
Note: The recording time information is estimated by the
current bit rate. This may change each time a user refreshes
this page.
D-Link DNR-322L User Manual
Status

Camera Status

70