Network Setup - D-Link DNR-322L User Manual

Section 3 - Configuration
DHCP: Select this connection if you have a DHCP server
running on your network and would like a
dynamic IP address to be automatically updated
to your NVR.
Static IP:
You may obtain a static or fixed IP address and
other network information from your network
administrator for your NVR. A static IP address will
simplify access to your NVR in the future.
IP Address:
The fixed IP address.
Subnet Mask:
The default value 255.255.255.0 is used to
determine if the destination is in the same subnet.
Gateway IP
Address: The gateway forwards frames to destinations in
a different subnet. Invalid gateway settings may
cause the failure of transmissions to a different
DNS1:
subnet.
Primary domain name server that translates
DNS2: names to IP addresses.
Secondary domain name server to backup the
PPPoE primary one.
Settings:
Enable this setting if your ISP (DSL service) is using PPPoE. You may already have a Username and Password provided by your
DHCP server:
ISP, or you may need to contact your ISP. The connection status will be determined automatically by the system.
Enable or disable the DHCP server. If your network doesn't have a DHCP server, enable NVR DHCP server for easier local network
setup.
D-Link DNR-322L User Manual

Network Setup

49