Power And Device Selection - D-Link DNR-322L User Manual

2-bay professional network video recorder

Hide thumbs Also See for DNR-322L:

Table of Contents

Section 3 - Installation

Power and Device Selection

First, connect the power adapter to the power receptor on the back of the

NVR. Press the power button located under the faceplate LEDs to turn on

the NVR. Click Next on the Setup Wizard to continue.

Select your device from the device selection area. A confirmation window

will appear asking you to check if the device's Power LED is solid. If it is

solid, select Yes in the confirmation window. Otherwise select No. If the

connection is good, then check that the hard drives are installed correctly

and have no other issues. Click Next to continue.

Note: When you select your device from the list, it will cause the LEDs to

blink to confirm the device selection.

Note: All configured NVRs are shown with their names in orange, while all

NVRs not configured are in blue.

D-Link DNR-322L User Manual

Table of Contents