Live Video - D-Link DNR-322L User Manual

2-bay professional network video recorder

Hide thumbs Also See for DNR-322L:

Table of Contents

Section 3 - Configuration

This section will enable you to configure and view the live video from your network cameras.

Set up Live View

Step 1: Click LIVE VIDEO at the top of the menu.

Step 2: Select a camera(s) from the camera list on the right and then drag it to the location to where you wish the image to

be displayed.

Step 3: Users can change the video display position by dragging it to another position.

Note

1. The selected video will be marked with a green line.

2. Enable Digital PTZ: Right-click on the video and click on Enable Digital PTZ. Click the + or – button to zoom in or zoom out the view. The lower

right square flashing on the video grid indicates the correspondent view of the camera.

3. If the camera supports PTZ, users can control the selected camera from the PTZ panel. Users can also right-click on the video and check Enable

Move to control the PTZ function directly. Please note that when Enable Move is checked, the video will be marked with a red outline. This

indicates that another camera cannot be adjusted until the PTZ function has been deactivated.

4. If the camera supports audio, users can check Enable Audio from the right-click menu and listen to live audio of this channel.

5. Snapshot: Right-click on the video and select the snapshot function to capture a specific video image immediately.

6. Right-clicking on the video will show the option to Toggle to Full Screen. Press the ESC button on the keyboard to return to normal display.

D-Link DNR-322L User Manual

Live Video

Drag and Drop

or double click

Table of Contents