System - D-Link DNR-322L User Manual

Section 3 - Configuration
Users can save the NVR configuration to a file and restore it when necessary, such as restarting the NVR in the event of a
crash. Reset the NVR to restore all configurations to factory default.
Restart: If the NVR is malfunctioning or crashes
unexpectedly, click Restart on the NVR.
Restarting the NVR will take about one and a
half minutes.
Default: This will reset all configurations to factory
default.
Shutdown: This will shut down the NVR.
Save All the configurations can be saved as a file to
Configuration: the specified location. Click Save to save the
file.
Load Users can restore the configuration file after
Configuration resetting to factory default file.
File: Click Browse to select the configuration file
and restore it by clicking Load.
Idle Time: When the adminstrator enters all the Setup
pages, except the Live Video and Playback
Page, the NVR will keep track of the idle time
when the user is not active. If this inactive
period reaches a certain time, the user will be
logged out and will have to log in again for
security purposes. Change the period of idle
time here.
D-Link DNR-322L User Manual

System

65