Hardware Specifications - D-Link DNR-322L User Manual

Appendix C - Technical Specifications
SYSTEM STATUS
+ Camera status, System status
+ Still picture EMAP support
NETWORK SERVICE PROTOCOLS
+ IPV4, ARP, TCP, UDP, ICMP
+ DHCP Client
+ NTP Client (D-Link)
+ DNS Client
+ DDNS Client (D-Link)
+ SMTP Client
+ HTTP Server
+ PPPoE
+ UPnP
+ IP filtering
USER INTERFACE
+ mydlink web portal - Internet Explorer 7 or later
+ HTTP Web browser - Internet Explorer 7 or later (32 bit OS only)
+ NVR Search Utility

Hardware Specifications

STANDARDS
+ IEEE 802.3/u/z
+ Auto MDI/MDI-X
+ SATA I, II
HARD DISK
1
+ Hard Disk control & manage via PC
+ Reformat Disk
+ RAID 0
+ RAID 1
2
+ JBOD
TWO RESET MODES
+ Reset firmware GUI button
+ HW reset button (press over 5 seconds)
D-Link DNR-322L User Manual
FLASH ROM
+ 128 MB
RAM
+ 256 MB DDR II
NIC
+ Gigabit Ethernet LAN port (10/100/1000 Mbps)
I/O PORTS
+ RJ45 port
+ DC-in jack
+ USB port for UPS status update (optional)
POWER ADAPTER
+ DC 12 V/3 A
RESET BUTTON
+ Reset to factory default
SECURITY
+ Device lock hole
POWER CONSUMPTION
+ Max. power consumption: 25.20 W
+ Standby state max. power consumption: 0.23 W
DIMENSIONS (W x D x H)
+ 115 (W) x 146.4 (D) x 178.5 (H) mm (4.53 x 5.76 x 7.03 inches)
WEIGHT
+ 875.1 g (1.93 lbs)
OPERATING TEMPERATURE
+ Operating: 0˚ to 55˚ C (32˚ to 131˚ F)
+ Storage: -20˚ to 70˚ C (-4˚ to 158˚ F)
HUMIDITY
+ Operating: 5% to 90% (non-condensing)
105