Advertisement
16
en | Installing a Recessed Mount
6.
7.
8.
F.01U.201.538 | 1.0 | 2010.12
Connect the mating connectors (supplied in the VJR
AutoDome accessory kit) with the flying leads to the user
supplied wiring (see the AutoDome Junior Installation
Manual for complete wiring information).
Plug the matching connectors from the camera into the
mating connectors from the ceiling.
Attach the camera to the mounting plate by inserting the
vertical tab on the plate (item 1, below) into the recessed
slot on the top of the camera dome (Item 3) to the right of
the safety locking screw (item 2).
Note: Do not loosen the three brass buttons. These brass
buttons engage the slotted tabs on the mounting plate.
Figure 3.10 Tab/Slot Alignment Detail
1
Vertical Tab (on mounting plate)
2
Locking Screw
3
Recessed Slot (on dome housing)
Mounting Guide
AutoDome Junior
Bosch Security Systems, Inc.
Advertisement
