Advertisement
AutoDome Junior
12. Loosen the two clamp drive screws (item 1, below) so that
13. Insert the bracket through the hole in the ceiling. Slide
Bosch Security Systems, Inc.
Figure 3.5 Attach Mounting Plate to VJR-A3-JW
the clamping plates (item 2) move freely.
Figure 3.6 Clamp Drive Screws and Plates
clamps out and down so that the ceiling/drywall is
captured in between the clamps and the bracket flange.
The ceiling/drywall must have a maximum thickness of
41.7 mm (1.64 in.) and a minimum thickness of 12.7 mm
(0.50 in.).
Mounting Guide
Installing a Recessed Mount | en
F.01U.201.538 | 1.0 | 2010.12
13
Advertisement
