Compressor Replacement Instructions - Mitsubishi Electric PUHY-HP200 Service Handbook

[ IX Troubleshooting ]

[6] Compressor Replacement Instructions

[Compressor replacement procedures]
Follow the procedures below (Steps 1 through 5) to remove the compressor components and replace the compressor.
Reassemble them in the reverse order after replacing the compressor.
1. Remove both the top and bottom service panels
(front panels).
3. Remove the wires that are secured to the frame,
and remove the frame.
HWE08110
Service panel
Control box
2. Remove the control box and the compressor
- 206 -
Compressor cover
(front)
cover (front).
GB