Winnebago Adventurer Basic Operation Manual

DVD HOME THEATER
SYSTEM
–If Equipped
The available DVD home theater
system operates from 120-volt AC
household current only, so you must
have either the shoreline connected, the
generator running, or the inverter turned
on (if equipped).
The TV is connected to the Home
Theater System which plays through
theater speakers in the lounge area of the
coach.
Connect Theater
Speakers
• Press the Speaker
switch on the dash to
TV position to connect
the theater speakers to
the Home Theater system.
NOTE:The Aux. Battery Disconnect
switch must also be on while
listening to Theater Sound
because the audio relay is
powered by house batteries. If
the Aux Batt switch is off, the
speakers will not emit any
sound.
Set TV Video Input
• Turn On both
TV and DVD
player
• Press TV/
VIDEO or
INPUT button
on the remote
or front of TV
and select
"Video 1"
input on the
TV.
The TV screen will display the DVD
player logo when the correct input is
selected.
Play DVD with Theater
Sound
• Insert DVD into player. DVD will
begin to 'load' automatically. TV
screen will typically show
"READING" or "LOADING."
• The DVD may load directly
to the main title/menu screen
or it may begin to play
previews. You may be able to
skip previews if desired by
pressing the 'Next' button
until you see the main menu screen.
• When the main
menu screen
appears, use the
arrow buttons on
the remote to
select the desired
entry or press the
ENTER or PLAY
buttons on the remote (or 'Play'
button on DVD player) to begin
playing the feature.
• Volume is adjusted with the DVD
remote (or volume control on DVD
player).
TV Sound through Home
Theater Speakers
When watching TV programs
(broadcast, cable or satellite), the TV
normally plays sound through its own
built-in stereo speakers. To connect TV
sound output to home theater speakers
for a richer sound quality, follow these
steps:
• Press Speaker switch on dash to TV
position.
• Turn the TV and DVD player On.
• Select the TV channel you wish to
watch.
• Press FUNCTION button on DVD
player or remote to set DVD player to
"AV IN."
• Use the TV Menu button to set TV
audio output to 'Variable Audio
Output.' (See TV owner's manual
Continued—