Winnebago View Profile Basic Operation Manual

DVD PLAYER WITH
DELUXE SOUND
–If Equipped
The DVD player is a selectable
function of the multi-featured audio
system. The player unit contains DVD/
CD/MP3/AM-FM Stereo radio. It also
accepts portable audio player inputs and
it also functions as an alarm clock.
The player is connected directly to
the TV and can output sound to either
the stereo speakers in the TV or to the
Deluxe Sound speakers in the lounge
area of the coach.
See the audio player manufacturer's
information in your InfoCase for
complete feature descriptions and
operating instructions.
Provide 12V Power
The TV and
DVD player
operate on 12-volt
DC current.
• Turn on the 12-
Volt Master
Power (TV)
switch, located
on the cabinet
or wall near the
DVD player.
NOTE: When
the TV or DVD
Player are not in use, the Master
Power switch should be turned off to
eliminate drain on the 12-Volt house
battery.
Connect Deluxe Sound
Speakers
• Press the Speaker
switch to TV position
to connect speakers to
TV and DVD. Speaker
switch is located near
the DVD player.
Set TV Video Input
• Turn TV and DVD player On.
• Press the MODE button on the TV or
the SOURCE button on the remote to
select "INPUT 1."
• The TV screen
will display
the DVD
player logo
when the
correct input is selected.
Play DVD
• Insert a DVD "face up" into slot on
lower face of the player.
• The DVD will begin to "load"
automatically. The TV screen will
typically display "READING" or
"LOADING."
• The DVD may load directly
to the main title/menu screen
or it may begin to play
previews. You may be able to
skip previews if desired by
pressing the "NEXT" button on the
DVD remote until you see the main
menu screen.
• When the main
menu screen
appears, press
the ENTER
button on the
remote or
"Play/Pause"
button on
DVD player to begin playing the
main feature. Use the arrow buttons
on the DVD remote to select another
feature to play .
• Volume is adjusted with the DVD
remote.
Continued—