Table of Contents
Advertisement
7-4. CAMERA ID
Set ON/OFF for enabling/disabling of ID display. Factory default ID is Software
version of camera. User programmed camera ID will be lost and restored with
factory default ID by CAMERA RESET.
Up to 40 characters can be input for camera ID.
CAMERA ID SETUP
VER-DN1.0
ABCDEFGHIJKLMNOPQRSTUV
WXYZ0123456789-!"#$%&'(
)_`,¥:;<=>?@\^*↑↓←→/
CHR1
RETURN
● Use four direction buttons (▲/▼/◄/►) to move the block cursor in character table
and press the set button (
To move the character input position on CAMERA ID input line, move the cursor to
← or → on COMMAND LINE and press the set button on ← or →.
● CLR : To clear CAMERA ID input line, move the cursor to CLR on COMMAND LINE
and press a set button (
● POS : To set the location of CAM TITLE to be displayed on the monitor, move the
cursor to POS and press the set button (
CAMERA ID will be displayed on the monitor.
Move CAMERA ID to desired position by using four direction buttons (▲/▼/◄
/ ►) then press the set button (
8. LANGUAGE
8 languages, ENGLISH, SPANISH, RUSSIAN, PORTUGUESE, GERMAN,
FRENCH, CHINESE and JAPANESE are available.
9. VERSION
The camera firmware version is displayed.
OSD MENU FEATURES/SETUP
CHR2
CLR
POS
◙)
to input the selected character.
◙).
◙)
and then the OSD menu disappears and
◙)
to fix. The OSD Menu will appear again.
26
CAMERA ID input line
COMMAND line
Advertisement
Table of Contents
