Table of Contents
Advertisement
1-8. LENS SHD COMP
This function is used to caculate the compensation data for lens shading.
Convex shape of the lens causes the light to enter the camera unevenly and typically
makes the center of the screen brighter than the rest. It is used to compensate for this
undesirable effect and make the screen more even.
Set to 'ON', you can adjust the shading PATTERN and POSITION.
LENS SHD COMP
PATTERN
POSH
POSV
RETURN
1-9. DEFOG
(default: ON)
This function is used to carry out defog function. Sets LEVEL to eliminate amount of
fog on screen.
If the DEFOG is set to ON, the WDR/BLC function will be deactivated.
1-10. FLK LESS
(default: AUTO)
This function is used to remove the flickering on screen due to differences in light and
electric frequencies.
1-11. ANTI-CR
(default: AUTO)
This mode can minimize problems related to color rolling caused by differences
between the flicker of fluorescent lights and the frequency of the camera.
2. PICT ADJUST
PICT ADJUST
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
COLOR GAIN
RETURN
OSD MENU FEATURES/SETUP
(default: OFF)
SET1
480
290
120
033
008
064
128
20
Advertisement
Table of Contents
