Table of Contents
Advertisement
OSD MENU FEATURES/SETUP
6. MOTION DET
Up to 4 motion detection areas are available and each area is programmable in size
and location. The motion is displayed by means of blocks when MOTION DET and
MOTION DET>BLOCK DISP are ON.
MOTION DETECTION
DETECT SENSE
INTERVAL
BLOCK DISP
MASK AREA
MONITOR AREA
RETURN
6-1. DETECT SENSE
Adjusts the sensitivity for detecting motion. Higher value is more sensitive.
6-2. INTERVAL
(default: 0)
Sets the interval time from the starting of motion operation until being ready for the next
motion operation.
6-3. BLOCK DISP
Enables or disables displaying blocks for the area which the motion is detected
6-4. MASK AREA
Sets MASK AREA for disabling MOTION DETECTION.
Selects number of area cells to set the area you need.
1
2
3
4
5
13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70 71 72
73 74 75 76 77 78 79 80 81 82 83 84
85 86 87 88 89 90 91 92 93 94 95 96
RETURN
OFF
(default: 111)
(default: OFF)
6
7
8
9 10 11 12
23
111
000
Advertisement
Table of Contents
