Audio Output Selection Formats; System Setting - Sharp SD-WH1000U Operation Manual

System Setting

Audio Output Selection Formats

About Output of Audio Formats
Audio Out
Use
Settings
The audio from speaker
WiSA Output connect with WiSA wireless
bridge
When connect to audio
Analog Output amplifier from Analog AUDIO
OUT terminal.
When connect to AV
HDMI Output amplifier from HDMI OUT
terminal.
When connect to AV
amplifier from Optical or
Digital Output
Coaxial DIGITAL AUDIO
OUT terminal.
*1 When input HDMI IN terminal, the audio is not outputted.
*2 When playback the SACD or DSD, the audio is not outputted.
Maximum
Output
number of
Terminal
channels
WiSA
Analog
HDMI
7.1ch, 96kHz
Optical/Coaxial
WiSA
Analog
2 ch, 192kHz
Down mixed
HDMI
Optical/Coaxial
WiSA
7.1ch, 192kHz
Analog
PCM or
Bitstream
HDMI
Optical/Coaxial
WiSA
Analog
2ch, 192kHz
PCM or Bitstream
HDMI
of Dolby Digital,
DTS
Optical/Coaxial
53
Output Note
3
(It is not outputted.)
The audio is PCM 2ch output.
3
The audio may not be output for some
audio signal in which copyright-protected
3
contents are recorded.*
(It is not outputted. )
3
• The audio is PCM 2ch output.
• The audio may not be output for
3
some audio signal in which copyright-
protected contents are recorded.*
(It is not outputted.)
(It is not outputted.)
The audio may not be output for some
audio signal in which copyright-protected
3
contents are recorded.*
3
(It is not outputted.)
(It is not outputted.)
3
The audio is PCM 2ch output.
3
The audio may not be output for some
audio signal in which copyright-protected
3
contents are recorded.*
*
1 2
1
1
1 * 2