Wihd Transmitter Unit; Wihd Receiver Unit - Sharp SD-WH1000U Operation Manual

Major Components

WiHD Transmitter Unit

TOP
POWER indicator
When power on,
indicator lit green.
Rear

WiHD Receiver Unit

Front
1
2
3
Left Side
NOTE
• The transmitter and receiver of WiHD are already a pair.
• A setting of a pairing of the transmitter and receiver is required when combination changes by service etc.
• To have Dolby TrueHD, DTS-HD Master Audio or SACD transmitted in its original format, use an HDMI cable to connect the
HDMI 1 OUT terminal on this player to the HDMI terminal on an AV receiver or other equipment.
DC IN terminal (p. 19)
DC IN terminal (p. 19)
4
DC IN terminal (p. 20)
HDMI IN terminal (p. 19)
DC IN terminal (p. 19)
HDMI IN terminal (p. 19)
Right Side
HDMI OUTPUT terminal (p. 20)
8
1
POWER indicator (p. 20)
When power on, indicator
lit green.
2
LINK indicator (p. 20)
When a connection to
the WiHD Transmitter is
established, the indicator
NOTE
• The indicator blinks
during search.
3
Remote control sensor
4
Antenna