Analog Audio Connection; Connecting To The Analog Audio Out Terminal - Sharp SD-WH1000U Operation Manual

Analog Audio Connection

Connecting to the ANALOG AUDIO OUT Terminal

• If you would like to connect a stereo audio amplifier, you can enjoy high quality analog audio sound through
ANALOG AUDIO OUT terminals.
• This player have two type terminals which the XLR balanced terminal and RCA terminal. Preference should
be given to the XLR balanced terminals since they may provide better noise rejection and signal integrity.
STEPS
1 Be sure turn off this Player and the equipment before making connections.
2 Firmly connect an audio interconnection cable (commercially available) to the AUDIO OUT terminals (1 and 2).
XLR balanced type terminals
This Player
Stereo audio amplifier
After connecting
• If necessary, perform the Audio Settings (page 44).
• Prepare the desired disc or content and start playback (pages
1
To XLR balanced
type AUDIO
OUT terminal
Audio Interconnect Cable
(XLR balanced audio cable:
commercially available)
To XLR balanced
2
type AUDIO IN
terminal
CAUTION
• Do not use the XLR to RCA adapter
(commercially available) or the XLR to RCA
conversion cable (commercially available).
This may cause malfunction.
RCA type terminals
This Player
To RCA type AUDIO
1
OUT terminal
Audio Interconnect Cable
(RCA type audio cable:
commercially available)
To RCA type
2
AUDIO IN terminal
31 - 40).
17
Stereo audio amplifier