Playback; Basic Operation; Volume Control; Mute - Sharp SD-WH1000U Operation Manual

Playback

Basic Operation

INPUT Front panel display
POWER

Volume control

The volume control affects all of the associated WiSA
compliant bridges and speakers.
It only affects the analog audio outputs, when "Analog
Output Volume" is set to "Variable" (see page 44).
It does not affect digital audio outputs (HDMI, Coaxial
and Optical).

Mute

The mute affects all of the associated WiSA-
compliant bridges and speakers.
It only affects the analog audio outputs, when "Analog
Output Volume" is set to "Variable" (see page 44).
It does not affect digital audio outputs (HDMI, Coaxial
and Optical).

SOUND MODE

This function produced a sound effect with WiSA
output. You can select the desired mode, which can
vary due to type of sound.
Press SOUND MODE r, s to select the desired
sound mode.
Modes
DIRECT, STANDARD, MODE 1, MODE 2, MODE 3

INPUT select

Press INPUT on the player or direct select button on
the remote control to select the desired input source.
Input Source
• HDMI1: Audio/Video signal from HDMI1 IN terminal
• HDMI2: Audio/Video signal from HDMI2 IN terminal
• HDMI3: MHL/Audio/Video signal from HDMI3 IN terminal
• COAXIAL: Audio signal from COAXIAL DIGITAL AUDIO
IN terminal
• OPTICAL: Audio signal from OPTICAL DIGITAL AUDIO
IN terminal
• USB DAC PC: Audio signal from USB DAC (PC) IN
terminal
• TV(ARC): Audio signal of TV (ARC) from HDMI 1
OUTPUT terminal
• DISC: "HOME MENU" screen
NOTE
• Audio Return Channel (ARC) is a feature, which allows you to
send digital audio signals from the television back to the player.
Instead of listening through TV speakers, ARC allows the sound
to be processed and produced by the home theater audio
system.
• You need to make sure the HDMI input port on the TV is
ARC capable. Usually, ARC has to be enabled in the TV's
settings.
• ARC function is not available when "Audio Out" select
item "HDMI Output" (page 44).
• If the USB DAC (PC) IN terminal cannot be used, update
the software of this player (page 50).
• To use a USB DAC, download and install the following file
from the below website on the connected PC.
http://www.sharpusa.com/CustomerSupport/
SharpCareCenter/Downloads.aspx

Picture Mute

Press the PICTURE MUTE button on the remote control to
turn off picture output.
The display of TV disappears and only sound is outputted.
Press the PICURE MUTE button again to resume picture
output.
30