SoundCraft Ghost User Manual page 156

Turn the Jog Wheel (2) in either direction until the flashing Snapshot Number dis-
plays the letters GLO.
Notice that as the Jog Wheel is turned clockwise, the number in the display is changed
through the range 1, 2, 4, 5, ....128, ALL, GLO, then repeated. Turning anticlockwise
changes the numbers in the reverse direction.
The console is now in "Global Setup" mode.
To select the required global MIDI channel, press the DOWN button three times,
which will select the Midi Chan field in the display, and it will start flashing. If the
Midi Chan field does not flash, continue to press the UP or DOWN buttons until
it is flashing.
The number (1-16) displayed in the Midi Chan field shows the currently selected
global MIDI channel for transmission and reception of program changes and note-
on data.
Now turn the Jog Wheel to change the number displayed in the Midi Chan field
until it shows the required channel.
When the required channel has been selected, press the DISPLAY MODE but-
ton once: the 7- segment display reverts to timecode display (the TC DISP LED
illuminates) and the message "Storing..." is displayed briefly, indicating that channel
has been memorised. This setting will be retained until it is changed again by
repeating the above procedure.
9.22 GHOST Application Guide