SoundCraft Ghost User Manual page 139

GHOST Application Guide
I I n n t t r r o o d d u u c c t t i i o o n n
The CPU section of the Ghost gives you power and functionality not available on
any other console in this class. Using the controls available on the CPU, you can:
l Remotely control tape machines, hard disk recorders and MIDI
sequencers,using the Transport controls and timecode display.
l Create up to four mute groups, giving you manual one-touch control of
muting for creative effects on groups of channels.
l Store up to 128 snapshots of console mute status and recall them either
manually, automatically against timecode, or remotely via MIDI program
change messages.
l Record and replay the consoles mutes dynamically against timecode, using
an external MIDI sequencer (not supplied).
l Transmit MIDI continuous controller data from any of the four MIDI con-
troller faders -use them to record level changes into a sequencer for mix-
down, or remotely control fx unit parameters in real time during a mix.
The 128 snapshots can also be used to store useful configurations of con-
troller fader setup.
The Ghost stores all user definable parameter setups and the 128 mute snapshots
in internal flash-ram, and will therefore retain all settings on power-off. It is also
possible to download the contents of the internal memory via MIDI system exclu-
sive bulk-dump, to a suitable storage device, for backup or archiving purposes.
9.5