Model M670i and M675i Expansion Modules
Installing the Expansion Modules
The M670i and M675i Expansion Modules connect to the right side of a 6757i IP phone via an RJ-45 connector and a con-
nector plate.
Connecting the Expansion Modules to Your Phone
Use the following procedure to connect the Expansion Modules to your 6757i IP phone.
1.
Turn your phone over to show the bottom of the phone.
2.
Turn the expansion module over to show the bottom of the module.
3.
Connect one end of the RJ-45 cable to the RJ-45 port on the back of your phone as indicated in the illustration below.
4.
Connect the other end of the RJ-45 cable to the RJ-45 port on the back of the expansion module as indicated in the
illustration above.
Connector Plate
Screw Holes on
Expansion Module
Back of Expansion
Module
5.
Line up the screw holes on the connector plate with the screw holes on the back of the phone.
20
M670i
Connector Plate
RJ-45 Connector
Connector Plate
Screw Holes on Phone
RJ-45 Cable
Back of Phone
M675i
41-001159-05 Rev 03 – 04.2012