Installing The Expansion Modules - Aastra 6755i Installation Manual

Installing the Expansion Modules

The M670i and M675i Expansion Modules connect to the right side of a 6755i IP phone via an RJ-45 connector and a
.
connector plate
Connecting the Expansion Modules to Your Phone
Use the following procedure to connect the Expansion Modules to your 6755i IP phone.
1. Turn your phone over to show the bottom of the phone.
2. Turn the expansion module over to show the bottom of the module.
3. Connect one end of the RJ-45 cable to the RJ-45 port on the back of your phone as indicated in the illustration below.
4. Connect the other end of the RJ-45 cable to the RJ-45 port on the back of the expansion module as indicated in the
illustration above.
Connector Plate
Screw Holes on
Expansion Module
Back of Expansion
Module
5. Line up the screw holes on the connector plate with the screw holes on the back of the phone.
6. Insert the two screws (included with your expansion module) into the connector plate holes and secure to the IP
Phone.
7. Turn over both units to sit face up on the desk with the expansion module sitting flush against the right side of the
phone.
41-001158-05 Rev 03 – 04.2012
Model M670i and M675i Expansion Modules
M670i
Connector Plate
RJ-45 Connector
Connector Plate
Screw Holes on Phone
RJ-45 Cable
Back of Phone
M675i
21