3.2.4.5
Security
The Security menu items allow you to change the system security settings. Select an
item then press <Enter> to display the configuration options.
Supervisor Password
The Supervisor/User Password item on top of the screen shows the default Not
Installed. After you set a password, this item shows Installed.
Change Supervisor Password
Select this item to set or change the Supervisor/User Password.
(1)Select the Change Supervisor/User Password item and press <Enter>
(2)From the password box, type a password composed of at least six letters
and/or number, the press <Enter>.
(3)Confirm the password when prompted.
The message "Password Installed" appears after you successfully set your pass-
word.
To clear the supervisor/user password, select the change Supervisor/User Password
then press <Enter>. The message "Password Uninstalled" appears.
After you have set a supervisor password, the other items appear to allow you to
change other security settings.
SIMB-A01 User Manual
64