HDA Controller
The options: [Enabled], [Disabled].
Onboard LAN Boot
The options: [Enabled], [Disabled].
JMicron 36X ATA Controller [Enabled]
Allows you to enable or disable the JMicron 36X ATA controller.
Configuration options: [Enabled] [Disabled].
Note!
Must load the JMB368 driver when creating RAID sets, even if all the
drivers of the RAID sets are used as data drivers.
Serial Port1~Port 4 Address [3F8]
Allow you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8] [2F8] [3E8] [2E8].
Serial Port IRQ
Configuration options: [3] [4] [10] [11].\
Parallel Port Address [378]
Allow you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC].
Parallel Port Mode [ECP]
Allow you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-Directional] [ECP] [EPP] [ECP&EPP].
Parallel Port IRQ [IRQ7]
Configuration options: [IRQ5] [IRQ7].
SIMB-A01 User Manual
56