Table of Contents
Advertisement
Important! Before installing the CPU, make sure that the socket box is facing
towards you and the load lever is on your left.
2.
Press the load lever with your thumb (A), then move it to the left (B) until it is
released from the retention tab.
Caution! To prevent damage to the socket pins, do not remove the PnP cap
unless you are installing a CPU.
3.
Lift the load lever in the direction of the arrow to a 135
4.
Lift the load plate with your thumb and forefinger to a 100
the PnP cap from the load plate window to remove (B).
o
angle.
o
11
angle (A), then push
SIMB-A01 User Manual
Advertisement
Table of Contents
