Rear Light
Fig. 135 Removing the tail lamp assembly
Fig. 136 Replacing bulbs
Read and observe
and
Removing
›
Open the boot lid.
›
Fold the rear seat backrest forward
›
Remove the boot cover
» page
›
Pry off cover
» Fig. 135
in the arrow area.
1
›
Below locking edge
, insert the screwdriver
3
pull the locking on connector
2
›
Press the locking mechanism
4
›
Hold the light firmly and unscrew the plastic nut
›
Carefully remove the light from the body and place it on a clean, smooth sur-
face.
›
Unlock the lamp holder
» Fig. 136
on page 136 first.
» page
56, Seat backrests.
65.
» page
120, Vehicle tool kit and
in the direction of the arrow.
and remove the connector
.
2
5.
- and remove the holder from the lamp.
Installing
›
Insert the bulb holder in the light.
›
Carefully place the tail light assembly in the opening in the body and hold
firmly.
›
Unscrew the plastic nut
» Fig. 135
5
›
Insert the connector
on the lamp holder and press the locking mechanism
2
towards the lamp.
›
Fold back the cover
.
1
›
Install the luggage compartment cover and close the tailgate.
Fold the rear seat backrest back.
Replacing the bulbs in the tail lamp assembly
›
Push the faulty bulb into the holder, turn in anti -clockwise direction up to
the stop and remove.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
CAUTION
Ensure that the vehicle paintwork and the tail lamp are not damaged when re-
moving and installing the lamp.
and tighten.
Fuses and light bulbs
139