Skoda Citigo Operating Instructions Manual page 31

Avoid high engine speeds during the running-in period and before the engine
has warmed up to the operating temperature.
CAUTION
The pointer of the tachometer must reach the red area for only a short time -
there is a risk of engine damage!
Counter for distance driven

Read and observe on page 26 first.
To toggle between the odometer and the counter for the distance travelled
(trip), briefly press the button
3
Counter for distance travelled (trip)
The daily trip counter shows the distance driven since the time the counter
was last reset - in steps of 0.1 km.
Reset counter for distance travelled (trip)
›
Press and hold the » Fig. 17
3
Odometer
The odometer indicates the total distance which the vehicle has been driven.
Service interval display

Read and observe on page 26 first.
The service interval display shows the mileage to the next service event.
Before the next service interval has been reached, the message  appears in
the instrument cluster display for some seconds and the remaining kilometres
are shown after switching on the ignition.
If the time of the service has been reached, an acoustic signal will sound and
the message  appears for a few seconds after switching on the ignition.
The information regarding the service intervals can be found in the service
schedule.
Note
Information is retained in the Service Interval Display even after the vehicle
battery is disconnected.
28
Using the system
» Fig. 17 on page 26 or » Fig. 18 on page 26.
on page 26 or » Fig. 18 on page 26 button.
Gear recommendation

Read and observe on page 26 first.
An information for the engaged gear is shown in the display of the instrument
cluster.
The function of the gear recommendation is to help reduce fuel consumption.
Show

Optimal gear engaged.

Recommendation that you shift to a higher gear.

Recommendation that you shift to a lower gear.
Recommended gear
The gear recommendation is intended only for vehicles with a manual trans-
mission or for vehicles with an automatic transmission in manual shift mode
(Tiptronic).
On vehicles with a manual transmission in the display, the recommended gear
and the respective arrow symbol is displayed.
For vehicles with automated manual transmission mode for manual shifting
(Tiptronic), the currently engaged gear and the respective arrow symbol is
shown in the display.
WARNING
The driver is always responsible for selecting the correct gear in different
driving situations, such as overtaking.
For the sake of the environment
A suitably selected gear has the following advantages.
It helps to reduce fuel consumption.
■
It reduces the operating noise.
■
It protects the environment.
■
It benefits the durability and reliability of the engine.
■
Importance