Skoda Citigo Operating Instructions Manual page 39

Hide thumbs Also See for Citigo:
Table of Contents

Advertisement

Airbag system
Read and observe
on page 32 first.
System fault
illuminates - there is a fault in the airbag system.
This also applies if the warning light does not come on when the ignition is
switched on.
The functionality of the airbag system is monitored automatically even if one
of the airbags is switched off.
One of the airbags or a belt tensioner has been disabled by the diagnostic
tool
illuminates for approximately 4 seconds after the ignition is switched on
and then flashes again for approximately 12 seconds.

The front passenger airbag has been disabled with the key switch
illuminates for a few seconds when the ignition is switched on.
in the letters     in the middle of the dash panel illumi-

nates after switching on the ignition
ger airbag.
WARNING
When a fault in the airbag system occurs, there is a risk of the system not
being triggered in the event of an accident. Therefore, this must be
checked immediately by a specialized garage.
Handbrake - automatic transmission
Read and observe
on page 32 first.
illuminates or flashing - set the parking brake.
Further information
» page
79, Automated transmission.
Brake pedal (automatic transmission)
Read and observe
on page 32 first.
Illuminates - apply the brake.
36
Using the system
» page
18, Deactivating the front passen-
Further information
» page
79, Automated transmission.
Turn signal system
 
Read and observe
on page 32 first.
flashes - the left turn signal is turned on.
flashes - the right turn signal is turned on.
If there is a fault in the turn signal system, the warning light flashes at twice
its normal rate.
When the hazard warning light system is switched on, this will cause all of the
turn signal lights as well as both warning lights to flash.
Cruise control system
Read and observe
on page 32 first.
illuminates - the cruise control system is switched on.
Main beam
Read and observe
on page 32 first.
illuminates - the main beam or the headlight flasher is switched on.
/ Rear seat belt warning light
Read and observe
on page 32 first.
 illuminates - a rear seat belt is not fastened.
 illuminates - a rear seat belt is fastened.
When the seat belt is fastened/unfastened, the particular light lights up briefly
and indicates the current belt status!
 City Safe Drive
Read and observe
on page 32 first.
 flashes quickly - City Safe Drive system is braking the vehicle automatically.
 flashes slowly - the system is not available or there is a system malfunction.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents