Skoda Citigo Operating Instructions Manual page 56

Adjusting the angle of the seat backrest
C
Adjust the tilt of the seat back (seats with Easy Entry System)
D
On the passenger seat, some controls are arranged in mirror image.
Adjusting a seat in a forward/back direction
›
Pull the lever » Fig. 44 in the direction of the arrow and push the seat in
A
the required direction.
The lock must click into place after you release the lever.
Adjusting height of seat
›
Again push or pull the lever
B
Adjusting the angle of the seat backrest
›
The seat back release (do not lean on).
›
Pull the lever in direction of arrow
C
desired inclination of the seat back.
For seats with Easy Entry system, the inclination can be adjusted using lever
D.
Fold forward and slide seat using the Easy Entry System
›
Pull lever » Fig. 44 and fold the seat backrest forwards.
D
›
At the same time, move the seat forwards.
Restore position of the seat with Easy Entry System
›
Push the seat backwards again to its original position.
›
Fold the seat backrest back.
The locking of the seat back must engage audibly - check by pulling on the
seat back.
» Fig. 44 in the direction of one of the arrows.
» Fig. 44 and with your back set the
Head restraints - adjusting height
Fig. 45 Rear head restraints: Move up / move down

Read and observe on page 52 first.
Only the rear head restraints can be removed.
Best protection is achieved if the top edge of the head rest is at the same level
as the upper part of your head.
Shift upwards
›
Grasp the support with both hands on its side and move in the direction of
» Fig. 45.
1
Move down
›
Press the locking button and hold it in arrow direction
A
›
Press in the support in the direction of arrow
WARNING
With rear seats occupied, the respective head rests must be correctly set
(may not be in the bottom position) - risk of fatal injury!
CAUTION
The front headrests are integrated into the seat backrests and cannot be ad-
justed in height.
» Fig. 45.
2
.
3
53
Seats and head restraints