Attaching/Removing Belt Clip
1.
Slide the adapter clip over the back of the mobile unit
until the clip snaps into place in the side openings. Pull
the clip slightly apart to remove it.
2.
Attaching belt clip: press – as shown – the upper end of
the belt clip together, slide it over the belt, and let go of
the end of the clip.
3.
Securing mobile unit: slide your mobile unit with the
adapter ring into the belt clip until it clicks into place.
4.
Removing mobile unit: press the release and pull the
mobile unit upwards out of the belt clip.
Installation
1
2
2
3
4
27