Page 2
Copyright Copyright 2006 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
Important safety instructions For safety reasons, please follow the important safety instructions in the LCD Display’s user’s manual. This wall mount kit can hold up to 20 Kg of weight. It is necessary to consult professional technicians prior to mounting the LCD Display. Before installation, check whether the material of wall is able to support this weight.
Wall mounting instructions Detaching the stand In order not to damage the screen, place a piece of soft and clean cloth in front of the LCD Display, and lay down the LCD Display on the cloth with the screen facing downward.
Page 6
Fixing the mounting hooks As shown below, secure the mounting hooks on the back of the LCD Display using 4 No.1 (for 26”/30”/32” LCD Display) or No.2 (for 37” LCD Display) screws. Install the mounting hooks from position A first, and then position B.
Page 7
Fastening the wall fixings on the wall Stick the mounting position reference chart on the wall. Drill 8 holes with a 6 mm diameter on the wall with a suitable driller according to the reference chart. Insert the anchors into the holes. Fasten the two wall fixings on the wall using 8 No.
Page 8
Placing the LCD Display on the wall fixings As shown below, align the slots on the wall fixings with the mounting hooks on the LCD Display, and hook the LCD Display into place.
Checking installation The installation is complete. Check for any loose screws on the mounting hook or wall fixings, or cracks on the wall. Should the LCD Display appear to be unstable, remove it from the wall immediately and consult your place of purchase or a professional technician for help.