Installation; Chassis Placement; Aux I/O Db25S Pin Out Diagram - Pacific 110ACX Operation Manual

3

INSTALLATION

This section describes the installation of the ACX AC Power Source.
3.1

CHASSIS PLACEMENT

The ACX Power Source is designed to operate as a bench-top unit, or to fit into a standard 19-inch
rack. Provisions for mounting slide rails are included on the chassis.
USE EXTREME CARE WHEN MOVING THE UNIT IN ORDER TO REDUCE CHANCE OF PHYSICAL INJURY.
WHEN MOUNTING SLIDE RAILS TO THE ACX CHASSIS, MAXIMUM SCREW LENGTH IS 8 mm.
VEILLEZ A PRENDRE TOUTES LES PRECAUTIONS NECESSAIRES DURANT LE TRANSPORT DE
L'EQUIPEMENT AFIN DE MINIMISER TOUT RISQUE D'ACCIDENT PHYSIQUE.
LA LONGUEUR MAXIMUM DES VIS DESTINEES A FIXER LES GLISSIERES SUR LE CHASSIS
It is the customer's responsibility to insure that units are adequately
packaged when they are moved to a different location. The ACX should
always be packaged in the original shipping container when moved or
returned to the factory for service.
SECTION 3
INSTALLATION
THE ACX WEIGHS 40 lbs [18.2 kg]
LA ACX PESE 40 lbs [18.2Kg]
DE LA ACX EST DE 8MM.
- - - - - - - - P A C K I N G N O T I C E - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
20
WARNING
ATTENTION