General; Using This Manual - Pacific 110ACX Operation Manual

1

GENERAL

This manual provides information required to properly use one of the ACX Series AC Power
Source models. This is a general Operations Manual and it describes the operation of the basic
power source. Installation, operation, and calibration are the subjects covered.
At this time, there are three models available in the ACX Series:
Model
110ACX
115ACX
118ACX
All ACX models are configured with a digital UPC (Universal Programmable Controller).
Detailed operating instruction and control and metering specifications are described in the UPC
Series Operation Manual which is supplied with the unit.
1.1

USING THIS MANUAL

This manual provides instructions for installation and use of the ACX Series Power Source
equipment. For this reason, it is very important that the user reads sections 1 GENERAL
information, 3 INSTALLATION, and 4 OPERATION, prior to using this equipment. A thorough
understanding of these sections is required to safely and properly operate this equipment.
Section 2 lists the specifications of the equipment. Knowledge of this information is required to
gain maximum use of this equipment for a given application. The user is encouraged to read
this section in order to gain a deeper understanding of the capabilities of the ACX Power
Source.
Sections 5 and 6 list MAINTENANCE and CALIBRATION requirements of this equipment.
Refer to these sections when either maintenance or calibration is required.
Section 7 describes SERVICE methodology and provides system, sub-assembly, and
component part numbers to aid the operator in making any factory authorized field repairs.
Section 8 contains the INDEX for this manual.
Section 9 contains product change notices, errata, and data relative to customer specified
modifications. Read Section 9 before operating the equipment. This is especially true when
modifications (MODs) have been installed, since these can change system operation.
If questions arise while reading this manual, the user is encouraged to call the Pacific Power
Source customer service department. Pacific maintains a toll-free number: 1-800-854-2433 or
use +1 (949) 251-1800.
SECTION 1
GENERAL
Maximum Output Power VA
1000 VA
1500 VA
1800 VA
7
SECTION 1 GENERAL